FlashBoxVideo.com

AlleeDriver asked:


my video camera records directly to a mini DVD but im recording things that need to be edited on a movie editer on my computer. but how do i transfer thoes individual clips onto the computer so i can move them around and edit? anyone have any ideas it would be a great help if anyone could help me!

3 Responses to “How to transfer video clips from a dvd recording video camera onto the computer?”

1. n_gined Says:
   August 31st, 2008 at 8:58 am

   Some computer DVD drives won’t play mini-DVD format discs, so the only way you can do this is by connecting the camera to the PC with a lead (USB / Firewire) and using the playback button, capturing the result into a suitable movie editing program. Bear in mind that not many computers have a Firewire IEEE1394 port, but many laptops do.
   Otherwise you could try finalising the mini DVD and load it up on your PC - but editing it involves ‘ripping’ the DVD from the disc using a program like DVDRip, and then using a movie editing program which can handle MPEG-2 to edit the very large resulting file. All a bit messy unfortunately!

2. mr_e_cowboy Says:
   August 31st, 2008 at 3:35 pm

   You have to capture the video into the computer. How you do that depends on the ports you have on the camera and the computer. They have to be compatible. As was mentioned it is usually a firewire or on some cameras a usb. It could also be an analog video and audio signal. Do you know what kind of port you have for capturing video into your computer? And what the output port on the camera is? If you can email me with that info I might be able to assist you further. The camera manual should have the info and possibly a diagram to show you how to connect it to the computer. Good Luck

3. BRIAN C Says:
   September 3rd, 2008 at 2:55 pm

   Try it this way

   Use a programme called VideoStudio - you take the mini-disc out of your camcorder and put it into the DVD tray of your PC making sure it sits centrally in the little depression made for it. You may have to ‘finalise’ the mini DVD your camera manual will tell you how to do that - you should note though that once you have finalised a disc you will not be able to use it again or add further videos to it.

   Inside VideoStudio you select “Insert DVD/DVD-VR” and point the programme at the DVD and follow the prompts and the video is copied from the disc into the timeline of VideoStudio so that you can edit it - add lots of different videos together cut out bits you don’t want - add titles/music/narration - If you wish you can then output a file to e-mail or upload to Youtube etc. - and finally burn to a full size DVD to play in a standard player.

   Full details and a one month free trial from :-

   or

   ##

Leave a Reply

You must be logged in to post a comment.